D9000,G & GV2 Series Owner's Manual Supplement
12.0Add/Change
User - [COMMAND 56]
12.1Description
Use this function to add or change a passcode or card without assistance from your security company. Before adding or changing a passcode or card, you must know which user numbers are available, the authority level you want to assign to the new user, and the areas in which the passcode or card are valid.
I have this feature.
I do not have this feature.
12.2Using Add User ?
1.Ensure the display shows idle disarmed text.
2.Press the [COMMAND] bar. The display shows SYSTEM
| COMMAND. | |
3. | Press [5] and [6]. | |
| You can also use the Function List in place of steps 2 and 3 to | |
| start this function. | |
| 1. Press the [MENU] key to enter the Function List. | |
| 2. Press [NEXT] until you reach the ADD/CHNG USER? | |
|
| prompt. |
| 3. | Press [ENT]. |
4. | The display shows ENTER USER #. Enter the user number and | |
| press [ENT]. | |
5. | The display shows USER # (or user text, such as the name of the | |
| user, if this feature was programmed into your system by your | |
| security company) to allow for confirmation. Press [ENT] if the | |
| correct user number (or user name) appears. Press [ESC] if not. | |
6. | ADD PASSCODE? appears (If the user number already exists, | |
| CHANGE PASSCODE? appears). Press [ENT]. ENTER NEW CODE | |
Bosch Security Systems 5/05 33267F | 17 |
