D9000,G & GV2 Series Owner's Manual Supplement
10.4Unlock Door?
1.To unlock a door to allow free access, at the CYCLE DOOR? prompt, press [NEXT] to enter the UNLOCK DOOR? subfunction.
The display shows UNLOCK 1 2 3 4 5 6 7 8 if all doors are in a normal state and available. If a door is not in a normal state, the number of the door is replaced with a symbol indicated in Table 1.
2.Enter the number of the door to unlock then press [ENT]. This door unlocks and the display changes to reflect the new status of the doors.
For example, if you wanted to unlock Door 4, at the following prompt:
UNLOCK DOOR 1 2 3 4 5 6 7 8 press [4] then [ENT]. The display shows:
UNLOCK DOOR 1 2 3 U 5 6 7 8
This indicates that all doors are in a normal state, except for Door 4, which is unlocked.
4.Press [ESC] to leave this subfunction, or enter another door number to unlock.
10.5Secure Door?
1.To secure a door to prohibit access to users regardless of their access authority level, at the CYCLE DOOR? prompt, press [PREV] to enter the SECURE DOOR? subfunction.
The display shows SECURE 1 2 3 4 5 6 7 8 if all doors are in a normal state and available. If a door is not in a normal state, the number of the door is replaced with a symbol indicated in Table 1 on page 12.
2.Enter the number of the door to secure then press [ENT]. This door secures, and the display changes to reflect the new status of the doors.
For example, to secure Door 5, at the following prompt:
SECURE DOOR 1 2 3 4 5 6 7 8
Press [5] then [ENT]. The display shows:
SECURE DOOR 1 2 3 4 X 6 7 8
14 | Bosch Security Systems 5/05 33267F |
