UserManual:1528L
SW200095RevA,Page6of39
Explaination of Symbols
Symbol Description
UL Classification means that UL has tested and evaluated samples
of the product with respect to certain properties of the product.
(look on page 9 )
For those EU Directives that permit it, the CE mark indicates product
compliance with standards indicated in the "Certificate of
Conformance" which accompanies the product packing information.
The Directive may or may not require verification by a Notified Body.
The LVD, EMC and MDD Directives permit products to indicate
conformity by the CE mark. MDD products may also require a
Notified Body mark.
Indicates tested to comply with FCC standards.
Indicates compliance with the European Community WEEE directive
2002/96/EC. Dispose of according to federal, state or local
regulations.
This symbol alerts the user to consult accompanying documents for
important information concerning the operation and maintenance of
this unit, which should be read carefully to avoid problems.
Guidance and manufacturer’s declaration – electromagnetic emissions
The 1528L is intended for use in the electromagnetic environment specified below. The customer or the user of the
1528L should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1 The 1528L uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
RF emissions Class B
Harmonic
emissions
IEC61000-3-2
Not applicable
Voltage
fluctuations/
flicker emissions
IEC61000-3-3
Complies