Elo TouchSystems 1528L user manual Touchmonitor Safety

Chapter 6: Touchmonitor Safety

This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter

3(Operation).

1.To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor case.

2.Turn off the product before cleaning. (See page 19 for Cleaning Instructions.)

3.Your touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug will only fit into a grounded outlet. Do not attempt to fit the plug into an outlet that has not been configured for this purpose. Do not use a damaged power cord. Use only the power cord that comes with your Elo TouchSystems touchmonitor. Use of an unauthorized power cord may invalidate your warranty.

4.The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots.

5.It is important that your touchmonitor remains dry. Do not pour liquid into or onto your touchmonitor. If your touchmonitor becomes wet do not attempt to repair it yourself.

User Manual: 1528L

SW200095 Rev A, Page 25 of 39