Bosch Appliances GVS1000 manual 3Inverting Tilt Controls, Other Menus

28 en Test SoftwareGlobal View Station 1000

6.1.3Inverting Tilt Controls

To invert the tilt settings, change the tilt settings:

– Uncheck Tilt Mtr Reverse

– Uncheck Tilt Res Invert

– Click Set Normal/Reverse

– Click Get Normal/Reverse to ensure the setting was applied

Figure 6.10 Settings to Invert Tilt Control

	Once the Tilt controls are reversed, the up and down soft limits are also reversed.
	For example, click the “U” direction on the track pad until the camera has reached the desired
	Down soft limit position. Then, click the Set Up Soft Limit to set the Down Soft Limit. The
	motor’s downward direction Soft Limit has now been set. Repeat for the Up Soft Limit.
	The same goes for setting the soft limits on the keyboard. Position the camera unit to the
	desired up view by pushing down on the joystick. Programming preset 38 will set Up Soft
	Limit and programming preset 37 will set Down Soft Limit. The soft limit is independent of the
	path taken to reach it, and only the position is saved for the appropriate limit.
6.1.4	Other Menus
	The MOVE TO menu allows the user to input a coordinate for the GVS1000 to move to, the

PRESETS menu allows the user to manage the preset positions, the TOURS menu allows the user to use to compose a tour from preset positions, and the OFFSETS menu allows the user to set or reset the coordinate system for the GVS1000.

F.01U.173.867 2.0 2010.11 Operations Manual Bosch Security Systems, Inc.