Product Features
Control panel
level no. 4 level no. 3 level no. 2 level no. 1
Halogen lights
Broiland top elements
Convection element (not visible) and fan located on back of oven
cavity (Convection Models Only)
Modeland sedal numberplate
Bake elements (under oven floor)
Figure 1.
About Your Oven
Above you will find an illustration of a Bosch
oven showing the components of the oven.
This manual covers the complete line of Bosch single and double ovens so some of the features described may not be available on your oven.
The rack or support should be positioned within
the paired supports. Each oven is provided with the following parts and utensils, see Figure 2:
•
•Broiler pan
•Pan support
•Rack(s)
Cooling Fan
All the ovens whether convection type or thermal type have a cooling fan to cool the control panel. You may hear this fan continue to run after cook- ing and/or cleaning has been completed.
The fan will run as long as the oven is hot and the oven's function selector is turned to any position other than "Off". This is normal operation.
Rack Positions
The oven has rack guides at four levels as shown in the illustration.
Each level guide consists of paired supports formed in the sidewalls on each side of the oven
cavity.
Always be sure to position the oven racks, sup- ports, etc. before turning the oven on. Make sure that the rack(s) are level once they are in position.
To remove oven rack or pan support from the
oven, lift rack/support at front and lift out. To replace oven rack or pan support:
1.Place rear of rack or support between the rack level guides.
. While lifting front of rack, slide rack or sup- port in all the way, then lower front.
Please refer to illustration if there is any
question as to which side is the front of either the rack or the support.
4
