Maintenance
Replacing an Oven Light
CAUTION:
• Make sure the appliance and lights are cool and power to the appliance has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns. Wear a leather- faced glove for protection against possible broken glass.
The light bulb is located at the rear of the oven and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.
To replace the oven light bulb:
1.Turn electrical power off at the main source or unplug the range.
2.Press wire holder to one side to release the glass shield.
3.Replace bulb with a new 40 watt appliance bulb.
4.Replace glass shield over bulb and snap wire holder into place.
5.Turn power back on again at the main source (or plug in the range back in).
6.The clock will then need to be reset. To reset, see Setting the Clock and Minute Timer in this Use and Care Guide.
English 22
