en
20 KTS 200 Initial startup
4.2.2Starting the KTS 200
1.Connect the KTS 200 to the mains using the power pack supplied.
?The KTS 200 starts up.
When turned on for the first time, the KTS 200 always starts in English.
The first time you connect the KTS 200 to the PC/laptop, the USB driver installation in the Win- dows operating system must not be carried out. The ESI[tronic] Startcenter installation routine automati- cally installs the USB driver that enables the KTS 200 to communicate with the PC/laptop.
If the Adobe Reader software is not yet installed on the PC/laptop, it will be installed at the end of the ESI[tronic] Startcenter installation routine. Adobe Reader is required to display the logs from KTS 200 control unit diagnosis on the PC/laptop.
6.When installation is complete, restart the computer.
?Windows is shut down and ESI[tronic] Startcenter is restarted.
2.If you want to use an alternative language on the KTS 200, select it under “Menu >> Settings >> Language”.
3.Connect the KTS 200 to the PC using the USB connecting lead.
?The KTS 200 waits for licensing to be completed.
7.License the KTS 200 either by fax or online.
The “Help >> Help” menu opens up the online help. Here, you will find all of the important information about ESI[tronic] Startcenter.
1 689 989 001 | Bosch Diagnostics |
