VIDEO DISPLAY
VD CLIENT INSTALLATION
Introduction
VD Client can be installed on the DCN operator PC as well as on another PC that has an Ethernet connection to the DCN operator PC.
On the DCN Operator PC
To install VD Client on the DCN operator PC:
•Put the
•Select the ‘Start’ button on the Windows Taskbar and click on ‘Run’.
A dialogue box appears.
•Type <D:\Video\Current\ClientSetup> in the ‘Open’ field and click on the ‘OK’ push button.
If the
On another PC
Besides installing VD Client on the DCN Operator PC, it is also possible to install it on another PC that has a network connection to the DCN Operator PC. However, in that case an extra software application must be installed on the DCN Operator PC that takes care of the communication between Video Display and VD Client. The following requirements must be met for a correct operation of this application:
•The TCP/IP protocol must have been installed on both PCs.
•Both PCs must be in the same workgroup.
•The IP address of the DCN Control PC must be 192.168.100.1.
•The IP address of the VD Client PC must be 192.168.100.2.
•The subnet mask of both PCs must be 255.255.255.0.
•Put the
•Select the ‘Start’ button on the Windows Taskbar and click on ‘Run’.
Digital Congress Network | Video Display |
Page 7 | Software User Manual |
