Nortel Networks V210 (RoHS) manual Installing Oracle 9.2.0.4 on the database server

Copyright © Nortel Networks Limited 2006

Installing Oracle 9.2.0.4 on the database server

The procedures to install Oracle 9 on the DBSvr include storing Oracle 9 CDs 1-6 to your local hard drive. Refer to the section that follows.

Approximate time for loading Oracle 9 = 90 minutes

ATTENTION

Refer to the CSI datasheet for such items as the hostname, IP addresses, and subnet masks.

ATTENTION

Perform these steps on all servers in parallel if multiple CDs are available.

Installing Oracle 9.2.0.4

Procedure 20 Installing Oracle 9.2.0.4 on the database server (DBSvr)

At the management pc,

1Use PuTTY to connect to the database server using Serial MGT port, which connects to the LX terminal server.

2Log in as root to the Management/Accounting server.

3Enter your <customer-specific password>.

4Enable the CD-ROM auto mount by typing the following command: /etc/init.d/volmgt start

You will see the message: volume management starting.

5Insert Oracle 9.2.0.4 CD 1 into the CD-ROM drive on the server.

6cd [ space] /cdrom/cdrom0 [Enter]

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide