Copyright © Nortel Networks Limited 2006 | 51 |
Continuing the process
15Confirm your information. Ensure all fields are filled correctly. Press Esc+2 to continue.
Press Esc+4 if you need to change anything.
16At the Regions prompt, select the country where the system is going to be deployed. Use the arrow keys to navigate to the required country and press the spacebar to mark your choice. Ignore time zone syntax errors.
Press Esc+2 to continue.
17At the Time zones prompt, select the time zone (for example, Central for the Richardson, Texas, area) where the system is going to be deployed. Use the arrow keys to navigate to the required time zone and press the spacebar to mark your choice.
Press Esc+2 to continue. Please wait for the next prompt.
18At the Date and time prompt, set up the date and time. Press Esc+2 to continue.
19Confirm information. Ensure all fields are filled correctly.
Press Esc+2 to continue and wait for the message: System identification is completed.
The Solaris installation program begins.
You will see the message Creating disk profile for system.
20
ATTENTION
Make the following selection very carefully. If you make a mistake at this point, you will need to start over, beginning with Powering on the servers on page 45. The selection of the number depends on the server type.
You will see the following message:
*********************************************
Choose server configuration:
1)Application Server
2)Management/Accounting
3)Oracle/DB
**********************************************
Select your required server type (1, 2 or 3), then press Enter.
MCS