Copyright © Nortel Networks Limited 2006 | 58 |
Provide between two and six ping targets or each IPMP group for proper IPMP failover reliability. Enter the address "0.0.0.0" to indicate list is complete, if entering less than six targets.
Enter ping target #1: 120.120.13.25
Enter ping target #2: 120.120.13.1
Enter ping target #3: 0.0.0.0
Note: Do NOT use this server's own IP address as a ping target.
Press Enter after each IP address.
14The configuration information will come up as shown in the following figure:
Figure 16 Database/Management/Accounting server IPMP configuration summary
Is this IPMP group configuration acceptable? (Y/N)
Select Y and press Enter.
15The default route IP address should appear. If correct, press Enter. Otherwise, type it in, then press Enter. Example: 120.120.13.1
Note: If your configuration does not include a router, then enter the machine logical IP address of your server.
16You are now configuring Management Server or Accounting Server Service Failover. Please have the Management Server System Manager and Accounting Server Accounting Manager Service Logical IP addresses and the Machine Logical IP addresses ready.
Press Enter to continue.
