Nortel Networks V210 (RoHS) manual Server Properties tab Parameter Recommended value Example

Copyright © Nortel Networks Limited 2006 116

The shaded rows indicate values that must be addressed by the installer.

Table 14 Server Properties tab

Parameter

Recommended value

Notes

Example

Service	Public_Service_Address		default
Parameter:
Label
Value:	<machine logical IP	This value is for the	120.120.13.25
	address of the application	Public_Service_Address
	server>
Service	Private_Service_Address	not applicable	default
Parameter:
Label
Value:	<leave blank>		default
Service	CallPark.TokenRange	Range is 1-80	default
Parameter:		characters
Label
Value:		This is the value to enter	default
		if you have the ability to
		park a call. For more
		information, see the
		MCS SIP Application
		Module Basics
		(NN10259-111)
		document.

14Use the values from the following table to enter into the Overload Controls tab parameters.

Table 15 Overload Controls tab

	Recommended
Parameter	value	Notes	Example
Mem Polling Interval (sec)	10		default
Minor Alarm Threshold (%)	80		default
Major Alarm Threshold (%)	85		default
Critical Alarm Threshold (%)	90		default

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006