Nortel Networks V210 (RoHS) manual 123

Copyright © Nortel Networks Limited 2006			123
Table 17 IP Client Manager tab (Sheet 2 of 2)
	Parameter	Recommended Value		Notes	Example
	Phase 1 Firmware ID	B60			default
	Phase 2 Firmware ID	D61			default
	Use UFTP	checked		Box is checked.	default
	UFTP Server Port	50020			default
	Keep Alive Timer	40			default
	KA Phone Timer	90			default
	Switch Server Delay	5000			default
	Min ReReg Delay	60000			default
	Max # Reg Attempts	25			default
	Server Recovery	1			default
	Time Min
	Server Recovery	5			default
	Time Max

2Use the values from the table that follows to complete the Database Base tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 18 Database Base tab

Parameter	Recommended value	Notes	Example
Primary Host	<machine logical IP address of		120.120.13.22
	the primary database server>
Connections	5		default
Secondary Host	<blank>	Leave blank	default

3Use the values from the table that follows to complete the UNIStim Base tab parameters.

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide