Cd-Rom | Nortel Networks V210 (RoHS) instruction

Hardware required for the 2-server system consists of the following:

•terminal server: 1 MRV LX-4008-101AC including

—Linux-based secure console standalone unit with 8 RS232 RJ45 ports

—internal V.90 modem and AC power

—software and documentation on CD-ROM

•core servers: 2 Sun Fire V210 servers including

—1 1.34-GHz UltraSPARC IlIi Processor with 1-MB On-Chip L2 Cache

—1-GB Memory

—2 swappable 73-GB Ultra 160 SCSI disks (second disk for mirroring)

—CD-ROM

—2 10/100-Mbit Ethernet and USB Ports

—System configuration card

—Solaris* 8 and ALOM v1.5 pre-installed

—two (2), cat-5 Ethernet cables for each V210 server (for a total of four (4) ethernet cables)

Note: Each V210 server uses two (2) ethernet cables to connect the V210 servers to the layer-2 switch.

—two (2) serial (RS232) cables for each V210 server (or a total of four (4) serial cables.)

Note: Serial cables are ordered with the MRV LX terminal server.

–one (1) cable for Serial Net MGT (LOM) port

–one (1) cable for Serial MGT port

—Sun Fire V210 server documentation

•Media Application Server: 1 IBM x336 (2- 3.6 GHz Xeon, 1-GB RAM, 1 73-GB SCSI drive, Windows 2000)

•Multimedia PC Clients

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006