Nortel Networks V210 (RoHS) manual Configuring the Provisioning Module, Select Add-Component

Copyright © Nortel Networks Limited 2006

Configuring the Provisioning Module

Prerequisites

Make sure the System Management Console has been installed and started.

Procedures

Procedure 35 Adding the Provisioning Module (Small

SharedMicro)

At the System Management Console,

1Select Sites->MgmtSite->Servers->AppSvr.

2Click on the plus sign next to the server to which you are adding the component.

3Right click on the Components folder.

4Select Add->Component.

5A list of component loads appears in the Load List window. Select the latest load for the “Provisioning Module (Small SharedMicro)”.

6Click Apply. Wait for the new component and the component configuration window to appear.

7Enter a label (maximum six [6] characters) in the Service Component Name field in the dialog box that appears.

Example: Prov

Note: The Provisioning Module will appear under the

IPCMProvWCM components folder.

ATTENTION

Do not click Apply until you have finished configuring the component.

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide