Nortel Networks V210 (RoHS) manual Network Connectivity/Networked

Copyright © Nortel Networks Limited 2006 49

Network Connectivity/Networked

3Accept the default Yes by pressing Esc+2 to continue.

DHCP/Use DHCP

4Accept the default No by pressing Esc+2 to continue.

Primary Network Interface /Primary Network Interface

5Choose bge0 as the primary network interface and press Esc+2 to continue.

Host name/Host name

6Enter the host name of the server, for example: micromgmt

Note 1: Host name cannot start with a number. Host names must be at least two characters and can contain alphanumeric characters and minus signs (-).

Note 2: Host names must be unique within your domain. Creating a duplicate host name will cause problems on the network after you install Solaris.

Press Esc+2 to continue.

IP Address 7

ATTENTION

Make sure you enter the machine logical IP address for this system. It must be unique and follow your site’s address conventions.

Enter the machine logical IP address.

Example: 120.120.13.22

Press Esc+2 to continue.

Subnets/System part of a subnet

8Accept the default Yes by pressing Esc+2 to continue.

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide