Nortel Networks V210 (RoHS) manual Adding a server

Copyright © Nortel Networks Limited 2006

Adding a server

Prerequisites

The System Management Console has been successfully installed and started.

Adding a server

Use this procedure to add each of your servers.

Note: You should view the content of this chapter as reference information. When you perform the procedures in the next three chapters (in this document) you will be asked to return to this chapter.

Procedure 27 Adding a server

At the System Management Console,

1Select Sites->MgmtSite->Servers.

2Right click on the Servers folder.

3Select Add->General.

4Use the following system server fields to complete the General server window that appears.

Note: The shaded rows indicate values that must be addressed by the installer.

System
server field	Customer defines	Example
Server Name	The name that will appear from the	<servername>
	management console.
Host Name	A name unique within your domain.	micromgmt
Location	Optional field. Describes the physical	default
	location of the server.
Latitude	Optional field. Describes the latitudinal	default
	coordinates of the location of this server.

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide