Copyright © Nortel Networks Limited 2006 | 76 |
5You will see the following message:
Select the Type of Deployment:
[1]Initial Deployment
[2]Upgrade of Database
[3]Rollback of Database
[4]Install Files only to
Select 1 for initial deployment, then press Enter.
6Enter Machine Logical IP Address - Primary DB:
Enter the <machine logical IP address of the MgmtSvr>, or press Enter to accept default.
Example: 120.120.13.22
7Enter the Machine Logical IP address - Management Server:
Enter the <machine logical IP address of the MgmtSvr>, or press Enter to accept default.
Example: 120.120.13.22
8Enter the Service Logical IP address of the SysMgr:
Enter the <service logical IP address of the SysMgr>, or press Enter to accept default.
Example: 120.120.13.22
Note: Information obtained for database deployment appears on the screen.
9Is the above data correct? [Y]
Press Y to select the default or N to change.
Note: The imssipdb deployment begins. The installer will notice the PuTTY window scrolling installation information. This is the Management/Accounting server sending the imssipdb data to the database server. Make sure that you receive the "Successful Install" box at the end of the script execution.
