Nortel Networks V210 (RoHS) manual Procedure 40 Configuring the Oracle Monitor tabs

Copyright © Nortel Networks Limited 2006 142

Procedure 40 Configuring the Oracle Monitor tabs

ATTENTION

Do not click Apply until you have finished configuring the component.

At the System Management Console,

1Use the values from the table that follows to complete the Oracle Server tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 36 Oracle Server tab

Parameter	Recommended value	Notes	Example
SNMP request port	9161		default
SNMP agent IP address	<either the word		120.120.13.22
	"localhost" or the
	machine logical IP
	address of the database
	server that this Oracle
	Monitor is running on>
Oracle Server name	imsdb1		default
Active	checked		default
Monitor functions:	GeneralInfo		default
Handler name
Monitor functions:	1		default
Polling interval (min)
Active	checked		default
Monitor functions:	OperationalStatus		default
Handler name
Monitor functions:	1		default
Polling interval (min)
Active	checked		default

2Use the values from the table that follows to complete the IMS Main Database tab parameters.

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006