Nortel Networks V210 (RoHS) manual Installing Disk 5 all servers, Procedure 17 Installing CD5

Copyright © Nortel Networks Limited 2006

Installing Disk 5 (all servers)

Approximate time estimate is 30 minutes.

Procedure 17 Installing CD5

At the management pc,

1Place CD5 in the CD-ROM drive, on the server, and press Enter at the prompt.

Note 1: CD5 will eject from the CD-ROM when installed.

Note 2: For Management/Accounting servers, you will be prompted for CD6. Refer to Installing Disk 6 (MgmtSvr/AcctMgr only) on page 69 for instructions.

The Application/IPCM server (AppSvr/IPCM) will reboot.

2

ATTENTION

On a brand-new machine, only the Net MGT (LOM) port is available until after CD5 completes. Once CD5 has completed, log out of the Net MGT (LOM) port.

Log back in through the terminal server to the Serial MGTport for the rest of the installation.

For installations on machines that have already had a system installed, just remain on the Serial MGT port.

After the AppSvr/IPCM reboot, log into this server (using the Serial MGT port) and change the passwords for the sysadmin, root, and nortel users.

Change the passwords on the MgmtSvr/AcctMgr server after

CD6 (not CD5).

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide