Nortel Networks V210 (RoHS) Enabling or disabling the automatic mount, Etc/init.d/volmgt start

Copyright © Nortel Networks Limited 2006

Enabling or disabling the automatic mount

Use the following procedure if you need to use the CD-ROM auto-mount after installation of CD5. Execute this procedure on the MgmtSvr (Server1).

ATTENTION

Keep this procedure for future use.

Procedure 18 Enabling or disabling the CD-ROM auto-mount

At the management pc,

1The system disables volmgt by default after CD5 is installed. To toggle it back on to install additional CDs, follow this step.

Log in as root from the console and type the following command:

/etc/init.d/volmgt start

2When you finish mounting the additional disk(s), remember to disable the volume manager for better security. To disable it, use the following command: /etc/init.d/volmgt stop

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide