Nortel Networks V210 (RoHS) Enter the Gateway IP address Default, Procedure 16 Installing CD4

Copyright © Nortel Networks Limited 2006 60

24Enter the <IP address for the Physical Ethernet Net Management Port> (Default: 0.0.0.0)

25Enter the <netmask for the Physical Ethernet Net Management Port> (Default: 255.255.255.0)

26Enter the <Gateway IP address> (Default: 0.0.0.0)

You are asked to confirm the LOM port configuration.

27Type Y to accept the LOM port configuration or N if you want to change something.

The system will now reboot and come up requesting that you insert CD5.

CD4 will eject from the CD-ROM drive when installed.

ATTENTION

If you are not prompted for CD5, contact support.

Application servers (SIP Application Module, IPCM, Web Client Manager, Provisioning Module)

Approximate time estimate = 15 minutes

Procedure 16 Installing CD4

At the management pc,

1Place CD4 in the CD-ROM drive and press Enter to continue. WAIT until you see the following statement appear:

”You are now configuring the NTP time source for this server. The servers which run the Management and Accounting service will be the source. You will need to provide the Machine Logical IP Address of each server. If running simplex mode, provide the same address twice.”

2Press Enter to continue.

3You will see the following message: "NTP Source 1: Enter the MACHINE Logical IP Address of the Management Server:

Enter the IP address, for example: 120.120.13.22

4You will see the following message: "NTP Source 2: Enter the MACHINE Logical IP Address of the Accounting Server:

Enter the IP address, for example: 120.120.13.22

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006