Nortel Networks V210 (RoHS) manual SIP TCF Base tab Recommended Parameter Value Example

Copyright © Nortel Networks Limited 2006		137
	The shaded rows indicate values that must be addressed by the
	installer.
Table 32 SIP TCF Base tab
	Recommended
Parameter	Value		Notes	Example
Transport Config	UDP=<machine		Replace	UDP=120.120.13.25:
	logical IP of the WCM		each	5080:optional;TCP=1
	Server.>:5080:optiona		instance of	20.120.13.25:5080:o
	l;TCP=<machine		0.0.0.0 in the	ptional;UDP=120.12
	logical IP of the WCM		UDP and	0.13.25:5085:optiona
	Server.>:5080:optiona		TCF strings	l:name=sipLscCondu
	l;UDP=<machine		with the	it;TCP=120.120.13.2
	logical IP of the WCM		machine	5:5085:optional:nam
	Server.>:5085:optiona		logical IP	e=sipLscConduit
	l:name=sipLscConduit		address of
	;TCP=<machine		the Web
	logical IP of the WCM		Client
	Server.>:5085:optiona		Manager
	l:name=sipLscConduit		Server
Invite Timer	128000			default
Maximum Number	5			default
of Redirections
Initial Maximum	20			default
Hop Value

3Use the values from the table that follows to complete the Web Client Manager tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 33 Web Client Manager tab (Sheet 1 of 2)

	Recommended
Parameter	value	Notes	Example
WCM Socket Server Active	checked		checked
WCM Socket Server Host	<machine logical IP		120.120.12.43
	address of the Web
	Client Manager>
WCM Socket Server Port	3090		default

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide