Nortel Networks V210 (RoHS) manual Procedure 31 Configuring the SIP Application Module tabs

Copyright © Nortel Networks Limited 2006 110

Procedure 31 Configuring the SIP Application Module tabs

ATTENTION

Do not click Apply until you have FINISHED configuring all the tabs.

At the System Management Console,

1Use the values from the following table to enter into the Authentication tab parameters.

Table 2 Authentication tab (Sheet 1 of 2)

	Recommended
Parameter	value	Notes	Example
Authorized SIP Nodes	<IP addresses of	Enter	Enter IPs of any
	other trusted	addresses	gateways or
	application servers,	individually.	conference servers
	conference servers,		being used. Also,
	and gateways this		enter the public
	application module		machine logical IPs
	interacts with. A		of any IPCMs being
	trusted relationship		used.
	implies that this		Note: Do not put in
	endpoint will not be		any WiCM servers,
	authenticated by the		since they are not
	application module.		trusted nodes.
	Also, trust can be
	applied to nodes
	that cannot perform
	user authentication,
	like conference
	servers and
	gateways.>
Private Key	MCP		default

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006