Nortel Networks V210 (RoHS) manual At the terminal server

Copyright © Nortel Networks Limited 2006

Installing and accessing the MRV LX-4000 series terminal server

The MRV LX terminal server allows the installer to access all the servers simultaneously.

ATTENTION

For complete information on how to install, configure, and access the MRV LX terminal server, refer to the MRV Communications, Inc., LX Series Software Kit CD, particularly the "Getting Started with the LX-4000 Series" and LX-4000 Quick Start Instructions that come in the terminal server box, or go to www.mrv.com.

Procedure 4 Connecting the MRV LX terminal server cable to the servers and management PC

At the terminal server,

1Connect port 8 to the management PC using the console cable and db9 connector that comes with the MRV LX terminal server.

Note: After the terminal server has been configured, the connection between the management PC and the terminal server is not needed, and the cable can be removed.

2Connect the MRV terminal server 10 Base-T port to the layer-2 switch.

Refer to the Getting Started with the LX-4000 Series document in the CD that comes with your terminal server for specific information about the pinouts on your terminal server model.

Procedure 5 Accessing the MRV LX terminal server

At the browser address field,

1Type in the IP address of your MRV LX terminal server. The LX Series Configuration Console page appears, as shown.

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide