Nortel Networks V210 (RoHS) manual Procedure 36 Configuring the Provisioning Module tabs

Copyright © Nortel Networks Limited 2006 130

Procedure 36 Configuring the Provisioning Module tabs

At the System Management Console,

1Use the values from the table that follows to complete the SIP TCF Base tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 24 SIP TCF Base tab

Parameter	Recommended value	Notes	Example
Transport Config	UDP=<machine	Replace each	UDP=120.120.
	logical IP of IPCM	instance of	13.25:5070:opt
	Server>:5070:optional	0.0.0.0 in the	ional;TCP=120
	;TCP=<machine	UDP and TCP	.120.13.25:507
	logical IP of IPCM	string with the	0:optional
	Server>:5070:optional	machine logical
		IP address of the
		IPCM server
Invite Timer	128000		default
Maximum Number of	5		default
Redirections
Initial Maximum Hop	20		default
Value

2Use the values from the table that follows to complete the User Agent Server tab parameters.

The shaded rows indicate values that must be addressed by the installer.

Table 25 User Agent Server tab

Parameter	Recommended value	Notes	Example
Application Server	<service logical logical		120.120.13.25
Host	IP address of the
	application server>
Application Server	5060		default
Port
Click-to-call	18		default
Cancel Delay

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006