LTC 8540/00 Series Instruction Manual Unpacking

EN 7

 

 

1UNPACKING

Unpack carefully. This is electronic equipment and should be handled with care.

Check for the following items:

Verify the model number of the unit

One (1) cable with 9-pin D-sub connectors

Connector Kit, containing ten (10) pieces of a twelve (12) pin connector

Installation manual

If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Bosch Security Systems Sales Representative or Customer Service.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

2SERVICE

If the unit ever needs repair service, the customer should contact the nearest Bosch Security Systems, Inc. Service Center for return authorization and shipping instructions.

Service Centers

USA

Telephone: 800-366-2283 or 585-340-4162

Fax: 800-366-1329

Email: cctv.repair@us.bosch.com Customer Service Telephone: 800-289-0096

Fax: 585-223-9180

Email: security.sales@us.bosch.com Technical Support

Telephone: 800-289-0096

Fax: 585-223-3508 or 717-735-6560

Email: technical.support@us.bosch.com Repair Center

Telephone: 585-421-4220

Fax: 585-223-9180 or 717-735-6561

Email: security.repair@us.bosch.com Canada

Telephone: 514-738-2434

Fax: 514-738-8480

Europe, Middle East & Asia Pacific Region Telephone: 44 (0) 1495 274558

Fax: 44 (0) 1495 274280

Email: rmahelpdesk@solectron.com

3DESCRIPTION

The LTC 8540/00 Alarm Interface Unit provides the Allegiant® series of matrix switcher/controllers (LTC 8500, LTC 8600, TC8700, and LTC 8800) with the ability to automatically display video under alarm conditions. The LTC 8540/00 accepts up to 64 contact closures or logic level inputs from remote sensing devices such as door contacts, PIRs, etc., and then reports the “alarm” information to the Allegiant series main CPU bay. Alarm inputs may be configured in groups of 32 to accept either normally open or normally closed contacts. The LTC 8540/00 also provides eight relay closure outputs upon alarm conditions

4INSTALLATION

4.1Power/Data

An interface cable for data/power between the LTC 8540/00 unit and the Allegiant CPU bay is supplied. If required, the Alarm Interface Unit may also be installed remotely using a user supplied Listed Class 2 or equivalent 12 VAC or 12 VDC, 8 W power source. A minimal 3 or 5 wire RS-232 interface would then be required for communication to the Allegiant CPU bay. If necessary, the supplied cable can be cut and spliced to make the appropriate connections. A table listing the unit’s interface port pinouts can be found at the end of this manual. Allegiant port pinouts are listed in the QUICK REFERENCE MAIN BAY REAR PANEL CONNECTOR PINOUTS section of the Allegiant Series Installation and Operating Instructions.

Caution: DO NOT connect an external voltage source to this unit if it is already connected directly to the Allegiant CPU bay using the supplied cable.

4.2Mounting Options

4.2.1 Rack Mount

The LTC 8540/00 unit is supplied from the factory in an enclosure suitable for rack mounting. The enclosure is one EIA standard rack width by two rack heights. Peel off the four rubber feet located on the bottom of the enclosure before installing into console.

Bosch Security Systems December 13, 2007

Page 7
Image 7
Bosch Appliances LTC 8540/00 instruction manual Unpacking, Service, Description, Installation

LTC 8540/00 specifications

The Bosch LTC 8540/00 is an advanced kitchen appliance designed to enhance the cooking experience with its innovative features and technologies. This high-performance oven is a blend of cutting-edge engineering and user-friendly functionalities, making it an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the Bosch LTC 8540/00 is its intuitive control panel. Equipped with a touch display, it allows users to easily navigate through various cooking modes, temperature settings, and timer functions. The clear interface ensures that even the most complex cooking tasks can be accomplished with ease, reducing the learning curve for new users.

This model boasts a multifunctional cooking system, incorporating several cooking modes such as convection baking, grilling, and baking. The convection baking mode circulates hot air, ensuring even cooking and browning. The grilling function is perfect for achieving a perfectly charred finish on meats and vegetables, while the dedicated baking mode provides optimal heat distribution for baked goods.

In terms of technology, the Bosch LTC 8540/00 showcases the brand’s commitment to energy efficiency. It operates with reduced energy consumption, helping users save on utility bills while also being environmentally friendly. Additionally, its rapid preheat function ensures that the oven reaches the desired temperature in a fraction of the time compared to traditional ovens, enhancing overall cooking efficiency.

Another notable characteristic is the built-in self-cleaning feature. This innovative technology utilizes high temperatures to incinerate food residues, eliminating the need for harsh chemicals and manual scrubbing. This not only saves time but also contributes to a cleaner kitchen environment.

The oven's spacious interior can accommodate large dishes and multiple trays, making it ideal for family gatherings and dinner parties. The sleek design and stainless-steel finish add a modern touch to any kitchen decor, blending seamlessly with surrounding appliances.

Overall, the Bosch LTC 8540/00 stands out for its combination of advanced features, user-friendly design, and efficient cooking technologies. It represents a perfect blend of functionality and aesthetics, tailored to meet the demands of contemporary cooking. Whether baking, roasting, or grilling, it promises to deliver consistent and delicious results every time.