3.Place and engage the twin beating whisk assembly on the driveshaft of the mixing bowl as shown in figure 8a.
Figure 8.
4.Place the
The
Placing into Operation w/Twin Beating Whisks
Make sure that the switch is in the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into the wall outlet. The bowl with whisk assembly is now ready for operation. See table 1 for examples demonstrating the use of the twin beating whisks.
Mixing bowl tips:
1.When using the mixing bowl to knead or mix a recipe designed to be prepared by hand, you will find that with the Bosch Kitchen Machine you can usually place all the ingredients in the mixing bowl at once. When doing this, always place the liquids in first. This will assure more thorough mixing.
2.When adding ingredients to a mixture:
a.Turn the rotary switch to a lower speed
b.Remove the cap from the filling funnel
c.Add the ingredients through the funnel opening and replace the cap
3.If a large batch of dough is to be left in the mixing bowl and allowed to rise, the cover should be removed and placed only loosely on the bowl so that it is free to move if the dough should begin to press on it.
Removing Contents
Before beginning to remove the contents from the mixing bowl, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the
The mixing bowl can be removed from the power unit by turning the bowl clockwise while lifting.
The contents may now be used as desired.
14