Electronic Safety Control
Monitors the power unit to assure that it is functioning properly. Provides automatic shutdown in case of interruption of the power supply, stalled motor or motor overload.
Digital LED Display
Multifunction digital display, see figure 2c:
1.Speed Display
The speed selected is displayed as bars across the top of the digital display: A single bar is illuminated for speed 1, two bars speed 2, etc.
2.Time Display
Time selected when using the timer control is displayed and counts down when timer is in use.
3.Error Reporting
Displays error message if there is a problem that has caused the electronic safety control to be activated. See TROUBLESHOOTING section for error codes.
Motor drive cover
Used to cover mono drive when not in use, see figure 2d.
Mono drive
Four electronically controlled shaft speeds are all available from a single location; each attachment automatically connects to the appropriate drive speed, figure 2e.
Gentle start
a special feature that brings the motor up to speed over a
Convenient cord storage
Convenient cord storage is located on the back of the power unit, see 2f.
Integrated hand grips
Side recesses provide for easy lifting and carrying of power unit when not in use, see 2g.
Figure 2.
6
