The dough hook should be used for all heavier substances such as cookie doughs, yeast doughs, pastry doughs and other heavy doughs. The dough hook should always be used when adding nuts, chocolate chips, dried fruits, hard butter or other fats, hardened brown sugar, etc. to a mixture.
Use of mixing bowl with twin beating whisks
Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable surface and switched to the Off position, “O/Off,” and that you have removed the motor drive cover.
1.Before using the mixing bowl and twin beating whisk assembly for the first time, it is recommended that the bowl,
The beating whisk assembly may be disassembled as shown in figures 7a and 7b, and washed in the dishwasher along with the mixing bowl and other components. After washing, make sure the whisk assembly components are dry before reattaching the whisks as shown in figures 7c and 7d.
The driveshaft should also be removed from the mixing bowl for cleaning, if it has not already been done. See previous section, covering mixing bowl and dough hook, for instructions on how to remove driveshaft.
2.If you have not already done so, remove the motor drive cover and place the mixing bowl on the mono drive of the power unit and turn the bowl counter-
clockwise with a slight downward pressure until bowl is firmly seated on the mono drive coupling, see figure 4.
CAUTION
Failure to make sure that the bowl is properly seated on the mono drive coupling before the power unit is turned On can result in damage to the bowl and/or coupling.
Figure 7.
13
