whisks during operation to prevent injury and/or damage to the power unit or accessories.
3.Always work with the bowl lid fitted in place.
4.Do not change tools until the power unit has come to a complete stop; when switched Off, the power unit will continue to turn for a brief period.
The mixing bowl with dough hook and twin beating whisks consists of the following components, see figure 3:
How to Use Dough Hook
The dough hook and mixing bowl are intended to be used to knead yeast doughs and to mix cookie and pastry doughs, and also when adding nuts, chocolate chips, dried fruit, hard butter or shortening, hardened brown sugar, etc. to batters.
Use of mixing bowl with dough hook
Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off,” and that you have removed the motor drive cover.
1.Before using the mixing bowl and dough hook for the first time, it is recommended that the bowl,
The driveshaft can be removed for cleaning by pushing down on the shaft, as shown in figure 4a. After washing, rinse and dry the driveshaft and replace in the bowl by pressing it in, from the bottom, as shown in figure 4b, until it snaps into place.
Figure 3.
4a. Stainless steel bowl with anti- splash cover and filling funnel cap
4b. Dough hook
4c. Twin beating whisks
Figure 4.
10
