Miele H 326 spots like rust appear on cata- lytic surfaces, AUTO flashes in the timer dis- play

Correcting minor faults

.. . spots like rust appear on cata- lytic surfaces.

When roasting on the rack, the circulat- ing air sometimes picks up spices, which are then deposited on the oven interior walls. Such residues are not removed by catalytic cleaning, they are best removed while fresh with a mild washing up liquid solution and a soft brush.

.. . there has been a power failure, and instead of the time of day "0·00" and "AUTO" flash in the display.

All pre-set times are deleted as a result of the power failure.

Enter the time of day again, and any other pre-set data.

.. . "0·00" appears when the audible tone is switched off.

This is not a fault.

The time of day will shortly reappear in the display field.

.. . "AUTO" flashes in the timer dis- play.

This might signal a data entry mistake,

–for example entering conflicting times.

–if the time of day is changed while a start and finish time have been pre- set.

–when the audible tone is switched off by pressing the "g" and ")" but- tons.

60