Miele H 320, H 326, H 316, H 310 manual KM 213, KM, Installation - Ceramic hobs

Installation - Ceramic hobs

KM 213, KM 215

*Space for fixing and cable

Prepare the worktop cut-out as illus- trated.

1	2
3
4	5
1	2
3
4	5

bSealing strip cHob

dWorktop eClamp fScrew

Loosen the screws f.

Under no circumstances should sealant find its way between the frame of the top part of the hob and the worktop.

This could cause difficulties or even damage should the hob ever need to be taken out for servicing. The rub- ber edge b under the top part of the hob provides a sufficient seal for the worktop d.

Set the ceramic hob c in the cut-out and centre it.

(The Miele inscription must be legible at the front).

Turn the clamps outwards e and tighten the screws f.

Check that the hob unit c fits tightly on to the worktop.

70