Miele H 310, H 326, H 316, H 320 Warning and Safety instructions, Correct usage, Technical safety

Warning and Safety instructions

This appliance complies with all rele- vant legal safety requirements. Im- proper use of the appliance can, however, present a risk of both per- sonal injury and material damage.

Before installation and before using the appliance for the first time, read the operating instructions carefully. They contain important notes on safety, on the installation, operation and care of the appliance. This way you will avoid the risk of accidents and damage to the appliance.

The appliance is not intended for use by young children or infirm per- sons without supervision.

Young children should be super- wised to ensure that they do not play with the appliance.

Keep these instructions in a safe place and pass them on to any fu- ture user.

Correct usage

The appliance is intended for do- mestic use to cook food, and in

particular to bake, roast, defrost, cook, dry fruit etc, and to grill.

Any other usage is at the owner’s risk and could be dangerous. The manufac- turer cannot be held responsible for damage caused by improper use of the appliance.

Technical safety

Before connecting the appliance to the mains supply make sure that

the voltage and frequency correspond to the rating on the data plate, other- wise the appliance could be damaged. Consult a competent person if in doubt.

The electrical safety of this ap- pliance can only be guaranteed

when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most import- ant that this basic safety requirement is tested by a qualified electrician. The manufacturer cannot be held respon- sible for the consequences of an inade- quate earthing system (e.g. electric shock).

This appliance must only be oper- ated as a built-in appliance. This is

necessary to ensure that all electrical components are shielded.

Never open the casing of the ap- pliance.

Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.

Installation work and repairs may only be carried out by a suitably

qualified and competent person in accordance with national and local safety regulations.

Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held respon- sible for unauthorised work.

11