Miele H 310, H 326, H 316, H 320 manual Installing the oven

Installing the oven

If the oven is to be built into a base unit, a cut-out is required in the in- terim shelf as close as possible to the wall or unit back panel to ensure that there is sufficient ventilation for the appliance.

The shape of the cut-out is not im- portant, as long as cut-out measures at least 150 cm2 (see also "Installing the cooker").

Turn off the mains electricity supply to the isolator.

Connect the oven to the electricity supply by the isolator.

Place the oven into the oven housing unit as far as the oven trim and align.

Open the oven door and using two screws secure the oven to the side walls of the housing unit through the holes in the oven trim.

The appliance must only be oper- ated when it has been built in.

75