20 en Installation

FLEXIDOME HD VR

 

 

5.2Mounting the unit

5.2.1Surface mounting

9.5 mm (0.375 in)

3x

3x

PCD 123 mm (4.84 in)

To mount the camera on the surface of a wall or ceiling:

1.Use the surface mount box as a template to mark the holes indicated in the drawing. The PCD is 123 mm (4.84 in).

2.Drill three holes with a diameter of 8 mm (0.3 in).

3.Insert the supplied plugs into the holes.

4.Attach the surface mount box securely using the three supplied screws.

5.If you use the side connection of the SMB, remove the cap covering the side entrance, otherwise, leave the cap in place.

AM18-Q0637 v1.1 2013.08

Installation Manual

Bosch Security Systems

Page 20
Image 20
Bosch Appliances NIN-932, NIN-832, NIN-733 installation manual Mounting the unit, Surface mounting