Bosch Appliances NIN-832, NIN-733, NIN-932 Camera positioning and field-of-view, FoV

FLEXIDOME HD VR Installation en 27

5.6Camera positioning and field-of-view

The camera module position can be adjusted along three axes and several zoom positions can be selected.

To help position the camera and set the field-of-view:

1.Connect a monitor to the 2.5 mm jack using the optional monitor cable (S1460) which provides a CVBS signal (for installation purposes only).

2.Apply power to the camera.

3.After power-up, wait a little (about 20 seconds).

4.Press the Menu button. This stops the IP video stream and enables the service video analog output.

S1460

FoV

CAUTION!

Do not expose the sensors to direct sunlight.

Bosch Security Systems Installation Manual AM18-Q0637 v1.1 2013.08