FLEXIDOME HD VR | Installation en 31 |
|
|
1.To rotate the image 180°, press and hold the Menu button until the image flips.
2.Briefly press the Menu button to set the start position for the automatic motorized focus adjustment.
–You will hear the motorized automatic back focus process running.
–The progress is shown on the monitor.
3.Briefly press the Menu button again and again to scroll through the preset zoom positions.
–The selection loops back to the beginning when you reach the last one.
4.When you reach the desired zoom position, use a long press of the Menu button to set the zoom position and to
5.If the camera is not correctly focussed, press the Menu button for a longer time to restart the wizard.
If the camera is correctly focussed, press the Menu button for a short time to change the analog output.
6.To change the analog output state, press the Menu button for a short time.
–Briefly press the Menu button again and again to select NTSC on, PAL on or OFF (default).
7.When the selection is made, use a long press of the Menu button to save the results.
–The zoom and focus position is stored.
–The iris is set to its original value.
–The video service output is disabled.
–The BNC video output is set to its selected state.
Note:
If the BNC video output is set to On, the second IP stream is disabled.
5.8Closing the unit
When the camera position is set and all adjustments have been made, close the unit.
Bosch Security Systems | Installation Manual |
