Care and Maintenance (continued)
To Remove the Fine Filter and the Micro Filter:
1.Lift the Fine Filter from the dishwasher floor
as shown | Figure 35 | |
in Figure | ||
| ||
35 and |
| |
flush it |
| |
clean by |
| |
holding it |
| |
under |
| |
running |
| |
water. |
|
To avoid possible diswasher damage, do not use harsh chemicals, abrasive cleaners, scouring pads (metal or plastic), or abrasive cloths/paper towels to clean your dishwasher’s exterior door panel. Your dishwasher’s exterior door panel can be damaged by doing so.
2.Remove the Micro Filter as shown
in Figure 36 and flush it clean
by holding it under running water.
Fine
Filter
Figure 36
Micro
Filter
Clean the Exterior Door Panel
Colored Doors
Use only a soft cloth that is lightly dampened with soapy water.
Stainless Steel Doors
Use a soft cloth with a
Clean the Door Gasket
Regularly clean the door gasket with a damp cloth to remove food particles and other debris.
To reinstall the filter system:
1.Return the Micro Filter (select models) to its installed position.
2.Return the Fine Filter to its installed position.
3.Place the Large Object Trap/Cylinder Filter Assembly into its installed position in the dishwasher floor.
4.Turn the ring handle clockwise 1/4 turn until it
is locked. | Figure 37 |
The arrow |
|
on the ring |
|
handle |
|
and the |
|
arrow on |
|
the Fine |
|
Filter |
|
should |
|
point to |
|
each |
|
other, as
shown by the circle in Figure 37.
5.Gently pull the ring handle to ensure that the assembly is locked into place.
18
