Preparing and Loading the Dishware (continued)
Top Rack Height Adjustment (models SHV56C and SHX56C only)
Remove the empty upper rack by pulling it out of the dishwasher to the point that it can be lifted upward, as shown in Figure 6.
Pull the rack outward and up until the rollers are completely free of the roller guides.
Figure 6 | Figure 7 |
Cup Shelves
In addition to cups, the cup shelves can also hold large utensils.
Grasp the cup shelves as shown in Figure 8 and fold them down.
Place cups
Figure 8
Knife Rack
(models SHE66C, SHX57C and SHV57C only)
The knife rack is an
extra shelf for | Figure 9 |
| |
knives and other |
|
large utensils. It is |
|
assembled onto an |
|
edge of the upper |
|
rack. |
|
Place knives with sharp sides down, see Figure 9.
Top Rack Only™ Cycle
This cycle allows you to save energy, water, and detergent by washing loads small enough to fill only the upper rack.
NOTE: The Top Rack Only™ cycle does not reduce wash time.
To use the Top Rack Only™ cycle:
1.Load the top rack.
2.Press the On/Off button.
3.Press the button for the desired wash cycle.
4.Press the Top Rack Only button.
Loading the Bottom Rack
Place large items in the bottom rack. Load pots | ||
and pans | Figure 10 | |
| ||
Figures 10 |
| |
and 11 show |
| |
typical |
| |
mixed loads |
| |
for the bottom |
| |
rack. |
|
Figure 11
12 place setting
7