place the cover, with pusher on the bowl and turn clockwise until tab on cover enters cover interlock and turn until tab clicks into place, figure 15b.

Placing into Operation with Juice Extractor

Make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Pull the electrical cord out to the necessary length and plug into a convenient outlet. The mixing bowl with juice extractor is now ready for operation.

Figure 15.

Juice Extractor tips:

Wash fruit and cut to fit into feeding funnel, as required. Set the rotary switch to speed 3 and feed fruit through feeding tube. Use pusher to feed in fruit, using light pressure. Be sure to check level of juice in bowl and empty juice into a suitable container before level of juice reaches level of bottom of strainer basket. Also watch strainer for pulp buildup and, if necessary, stop the power unit and remove pulp. See Removing Contents, below.

Removing Contents

Before beginning to remove the contents from the bowl or pulp from the strainer, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the cover of the juice extractor from the bowl by

turning the cover counterclockwise while lifting. Then remove the grater/strainer. Empty pulp from the strainer, as required. If bowl needs to be emptied, pour juice into a suitable container.

Care and Cleaning of Mixing Bowl with Juice Extractor

The bowl and juice extractor are dishwasher safe. Do not use scouring cleaners on the bowl or juice extractor.

With the power unit turned Off and unplugged, it should be cleaned only with a clean, damp cloth. Then wipe off the safety motor drive cover and reinstall on the power unit, if necessary. Never use coarse or caustic cleaning products to clean the power unit. Never immerse the power unit in water.

It is recommended that, after cleaning, the mixing bowl and its cover be stored on the food processor. In this way, if you wish at some later time to use the blender, the mixing bowl and its cover will already be in place.

21