Built-in Safety Cutout

The Bosch Food Processors are provided with a built-in safety cutout to protect the motor against overheating.

If the safety cutout should open:

a.Turn the processor to the off position “O/Off” and unplug.

b.Contact Bosch Small Appliances Customer Support, see page 6, for closest Bosch authorized service center.

c.Take, or ship, the food processor to a Bosch authorized service center to have the safety cutout replaced.

Safety Cover Interlock

The Bosch Food Processor incorporate in their design a special safety feature; the Safety Cover Interlock, figure 2c. This feature prevents the rotary switch from being turned from the Off position, “O/Off,” if cover has not been placed on the bowl properly and rotated to trip the Safety Cover Interlock.

Safety Motor Drive Cover

Another special safety feature incorporated in the Bosch Food Processors is the Safety Motor Drive Cover, figure 2d. The Safety Motor Drive Cover must be in place on the high speed blender drive when not in use or the motor will not start when turned to one of its On positions, or if removed while power unit is running will bring the power unit to a stop.

Dual drives

The Bosch Food Processors come with three drives:

•A high-speed drive directly coupled to the motor, used to drive the blender and other special accessories, located under the Safety Motor Drive Cover, figure 2e.

•A dual drive, figure 2f, used by bowl accessories: one high-torque drive used to drive dough hook, citrus juicer and other special accessories requiring high torque; and, a high speed drive used to drive the multifunction blade, beater, whipping whisk and other accessories requiring higher speeds.

Convenient cord storage

The MCM 5200 UC model stores the cord internally, on an automatic cord winder, see figure 2g.

Four rubber feet

Four rubber feet provide the ultimate in stability, while also serving to isolate the power unit from the hard surface to minimize noise and vibration, figure 2h.

Special features of mixing bowl

The mixing bowl has a number of special features:

Dual feeding tube

The three-quart capacity mixing bowl comes with two feeding tubes molded into the cover. The small tube may be used for slicing or grating items that you wish to stand on end.

Pusher/measuring cup

In addition to its ability to act as both a pusher and a measuring cup, the slimmer portion of the pusher has a hole at the bottom to allow it top be used as a funnel when liquids need to be added to the mixture in the bowl. See figure 3a.

Filling tray

The MCM 5200 UC, Bosch Food Processor, also comes with a filling tray that can be mounted on the feeding funnel to simplify the feeding of material into the bowl, figure 3b.

7