Bosch Appliances UML-273-90 Using the Monitor On-screen Display OSD, Source, Menus

Bosch High Performance	Navigating the Monitor en 43
HD LED Monitors

6	Menu	Selects the on-screen display (OSD).
7	VIDEO	Selects the signal to be displayed
	SOURCE/	Serves as the “Enter” function for OSD
	ENTER	menus

6.2Using the Monitor On-screen Display (OSD)

The LCD is programmed through the on-screen display (OSD) menus and submenus where an operator can select operating parameters. To access the OSD menus, press the Menu button on the control panel. Use these controls to make any necessary adjustments to the OSD.

	Notice!
i	When you are navigating through the OSD menus, use the
	SOURCE or ENTER button to select a menu and use the MENU
	button to exit a menu.

To navigate the set up menus, follow the steps below:

1.Connect a video source cable to the monitor.

2.Press the Power button to turn on the unit.

3.If required, press the SOURCE or ENTER button and then the and the up and down arrow buttons until a signal is displayed.

4.Press the Menu button to activate the main menu selections.

5.Press the up and down arrow buttons buttons to select a menu.

6.Press the right arrow button to enter the selected menu.

7.Press the up and down arrow buttons to select a sub-menu item.

8.Press the left and right arrow buttons to toggle the OSD values.

9.Press the Menu button to exit the selected menu and to return to the menu bar or to confirm a selection.

10.Press the Menu button again to exit the OSD menu bar.

Bosch Security Systems, Inc. Installation Manual 2013.02 3.0