Bosch Appliances VG4-500I, VG4-200, VG4-300 Basic Keyboard Operation, 2Keyboard Commands, Lcd

8 en Getting StartedVG4 Modular Camera System

1.2.1	Basic Keyboard Operation
		The following tables summarize the basic operations for a standard keyboard and the
		functions available to control an AutoDome camera.
		Typical Keyboard	Usage
		Features
		Function Keys	Selects a specific control setting.
		Number Keys	Inputs a number from 0 to 9.
		Camera Key	Selects a camera number.
		Enter Key	Inputs a selection.
		Focus Key	Sets the lens focus or makes a menu selection in OSD mode.
		Iris Key	Sets the lens iris setting or makes a menu selection in OSD mode.
		Key LEDs	Indicates an active key.
		LCD	Displays the current status.
		Joystick	Controls a pan/tilt/zoom (PTZ) AutoDome camera.
		Table 1.1 Typical Keyboard Functions
		Dome Operation	How to control
		To Pan Side to Side	Move the joystick left or right.
		To Tilt Up and Down	Move the joystick forward and back.
		To Zoom In	Twist the joystick clockwise.
		To Zoom Out	Twist the joystick counterclockwise.
		Table 1.2 Typical Keyboard Controls for an AutoDome Camera

1.2.2Keyboard Commands

Keyboard control commands are composed of a sequence of three (3) inputs with the following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.

– Depending on the type of keyboard, the control function keys are labeled: ON or AUX ON

OFF or AUX OFF

SET or SET SHOT

SHOT or SHOW SHOT

NOTICE! The convention used for control key commands in this manual is ON, OFF, SET, and SHOT. Refer to your keyboard manual for the key naming conventions.

–Command numbers range from 1 to 999. See Section 6 Keyboard Commands by Number, page 43 for a complete list of keyboard commands.

–The Enter key can also be labeled with the 8 symbol.

For example, the keyboard command to make the AutoDome pan 360º continuously is:

ON-1-ENTER(press the ON key, then press the number 1 key, and then press ENTER.)

F.01U.133.268 6.0 2010.03 User’s Manual Bosch Security Systems, Inc.