Bosch Appliances VG4-300, VG4-200 Lens Settings Group, Advanced Mode PTZ 10.27 PTZ Settings Group

84 en Configuring the IP AutoDomeVG4 Modular Camera System

10.25	Lens Settings Group 2
	Digital Zoom
	Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
	video image. It is accomplished electronically, without any adjustment of the camera's optics,
	and no optical resolution is gained in the process. Select Off to disable or On to enable this
	feature. The default setting is On.
	Zoom Polarity
	Capability to reverse the operation of the zoom button on the controller.
	– Normal (default): zoom controls operate normally.
	– Reverse: zoom controls are reversed.
	Focus Polarity
	– Normal (default): focus controls operate normally.
	– Reverse: focus controls are reversed.
	Iris Polarity
	Capability to reverse the operation of the iris button on the controller.
	– Normal (default): iris controls operate normally.
	– Reverse: iris controls are reversed.

10.26	Advanced Mode: PTZ
10.27	PTZ Settings Group 1
	Auto Pan Speed

Continuously pans the camera at a speed between right and left limit settings. Type a value between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.

Standard Tour Period

Controls the waiting time until the dome moves to the next scene. Select a time period. The default is 5 seconds.

PTZ Fixed Speed

Controls the pan, tilt, zoom with a fixed speed value. Type a value between 1 and 15, inclusive. The default setting is 4.

Inactivity

Selects the time period the dome must be not controlled until the inactivity event will be executed.

– Off (default): camera remains on a current scene indefinitely.

– Scene 1: camera returns to Preset 1.

– Previous Aux: camera returns to the previous activity.

Inactivity Period

Determines the behavior of the dome when the control for dome is inactive. Select a time period from the pull-down list (3 sec. - 10 min.). The default setting is 2 minutes.

Auto Pivot

The Auto Pivot tilts the camera through the vertical position as the camera is rotated to maintain the correct orientation of the image. Set the Auto Pivot to On (default) to automatically rotate the camera 180º when following a subject traveling directly beneath the camera. To disable this feature, click Off.

F.01U.133.268 6.0 2010.03 User’s Manual Bosch Security Systems, Inc.