Bosch Appliances VG4-300 Aux Control Tab, Number Description, To Enter a Keyboard Control Command

64 en Using the IP AutoDome VG4 Modular Camera System

Aux Control Tab

The Aux Control tab is used to enter pre-programmed keyboard control commands. See Section 6 Keyboard Commands by Number, page 43, for a list of all commands. To access the Aux Control tab, navigate to the Livepage and click the Aux Control tab (see Figure 8.3 below).

NOTICE!

The Aux Control tab can also be used to display the OSD menus. Once the OSD menus are displayed, the virtual joystick in the View Control tab can be used to navigate the menus, and the Focus and Iris buttons can be used to make menu selections.

Figure 8.3	Aux Control Tab
Number	Description
1	Command number field
2	Keypad (numbers 0-9)
3	Show a preset shot
4	Set a preset shot
5	Initiates a command
6	Deletes a number in the Command Number field
7	Used to select a menu item
8	Stops a command

To Enter a Keyboard Control Command:

1.Place the cursor in the Command Number field.

2.Click the desired command number via the on-screen keypad.

3.Click either the Aux On or the Aux Off button to initiate or stop the command. See Section 6 Keyboard Commands by Number, page 43, for a list of commands.

4.If the command initiates a menu, use the Up/Down arrows on the View Control to navigate the menu. Click the Focus or Iris button to select a menu item.

To Set a Preset Shot:

Preset shots (or scenes) are camera positions that are saved in memory for future use.

1.Move your cursor over the live image and wait for the area to display a directional arrow.

2.Click and hold a mouse button to pan to the desired position you want to save.

3.Click any number combination from 1-99 (1-64 for a 200 Series AutoDome, 90-99 for 500i Series AutoDome are used for motion detection) from the on-screen keypad to identify the scene number.

4.Click the Set Shot button. The image area displays a message that indicates which shot number was saved.

F.01U.133.268 6.0 2010.03 User’s Manual Bosch Security Systems, Inc.