Chapter 5 Remote Interface Reference

System-Related Commands

INSTrument :DMM {OFFON}

:DMM?

Disable or enable the internal DMM. When you change the state of the internal DMM, the instrument issues a Factory Reset (*RST command). The :DMM? query returns the state of the internal DMM. Returns “0” (disabled) or “1” (enabled).

INSTrument:DMM:INSTalled?

Query the instrument to determine if the internal DMM is installed. Returns “0” (not installed) or “1” (installed).

*RST

Reset the instrument to the Factory configuration. See “Factory Reset State” on page 160 in chapter 4 for a complete listing of the instrument’s Factory Reset state.

h x z x”

FACTORY RESET “z

“fxz5

 

SYSTem:PRESet

5

 

Preset the instrument to a known configuration. See “Instrument Preset State” on page 161 in chapter 4 for a complete listing of the instrument’s preset state.

h x z x”

PRESET “ z “vz

gfxz5

 

SYSTem:CPON {100200300ALL}

Reset the module in the specified slot to its power-on state (CPON means “card power on”). To reset all three slots, specify ALL.

h zv z

“ “

267

Page 265
Image 265
HP 34970A manual INSTrument DMM Offon, Fxz5, SYSTemPRESet, Gfxz5