HP 34970A manual Temperature Configuration Commands, General Temperature Commands

Chapter 5 Remote Interface Reference

Temperature Configuration Commands

Temperature Configuration Commands

See also “Temperature Measurement Configuration” in chapter 4 starting on page 106.

General Temperature Commands
UNIT
:TEMPerature {CFK}[,(@<x		>)]
:TEMPerature? [(@<x	>)]

Select the temperature measurement units on the specified channels. The default is “C”. The :TEMP? query returns the temperature measurement units currently selected. Returns “C”, “F”, or “K”.

[SENSe:]TEMPerature:TRANsducer
:TYPE {TCoupleRTDFRTDTHERmistorDEF}[,(@<x		>)]
:TYPE? [(@<x	>)]

Select the type of temperature transducer to use for measurements on

the specified channels. Select from TC (thermocouple), RTD (2-wire RTD), 5 FRTD (4-wire RTD), or THER (thermistor) . The default is TC. The

:TYPE? query returns the current temperature transducer type on the specified channels. Returns “TC”, “RTD”, “FRTD”, or “THER”.

[SENSe:]TEMPerature
:NPLC {0.020.2121020100200MINMAX}[,(@<x	>)]

Set the integration time in number of power line cycles (PLCs) on the specified channels. The default is 1 PLC. MIN = 0.02. MAX = 200.

S “ z zv wzzz”v 3

zz 3 “ y”3 vy	“ w3 zz z
w ”z	203. For more information on time, refer to “Custom A/D

Integration Time” in chapter 4 starting on page 103.

219