HP 34970A manual Execution Errors 114j, 121, 123, 124, 128, 131, 134, 148, 151, 158

Chapter 6 Error Messages

Execution Errors

-114j

P –” – x y– x––“ – – ” z – – –x“ x “5

kF OUTP:ALARM5:SOURCE (“5” is not a valid alarm number)

-121	k
	An invalid character was found in the number specified for a parameter.
	k	:	TRIG:TIMER 12..34
-123	p
	A numeric parameter was found whose exponent was too large for this
	command. k			: CALC:SCALE:GAIN 1E34000
-124	v
	A numeric parameter was found whose mantissa contained more than
	255 digits, excluding leading zeros.
-128	p
	The wrong parameter type was found in the command string. You may
	have specified a number where a string or expression was expected,
	or vice versa. k			: DISP:TEXT 5.0			ROUT:CLOSE 101
-131	k
	A suffix was incorrectly specified for a numeric parameter. You may
	have misspelled the suffix. k					: ROUT:CHAN:DELAY 5 SECS
-134	u
	A header suffix is the number that can be appended to the end of some
	command headers. This error is generated if the header suffix contains
	more than 12 characters.
-148	e
	A discrete parameter was received but a character string or a numeric
	parameter was expected. Check the list of parameters to verify that you
	have used a valid parameter type. k						: ROUTE:CLOSE CH101
		DISP:TEXT TESTING			(the string must be enclosed in quotes)
-151	k
	An invalid character string was received. Check to see if you have
	enclosed the character string in quotation marks and verify that the
	string contains valid PjS__ characters.
	k	:	DISP:TEXT ’TESTING			/– –
-158	u
	P zx x–“ y –“ ” 5
	S– ” xx ”		–“ x
	xx––5		k	F	CALC:SCALE:STATE ’ON’

:7B